Destination input with barcode scanner
Requirements
– Prepare the truck for operation, see page 138 or see page 139.
– Drive the truck into the narrow aisle and establish automatic guidance, see
page 159.
Procedure
• Scan in the label with the barcode scanner.
• The destination stored on the label is transmitted directly to the driver's display.
Destination entry with the barcode scanner is now complete. The destination can
now be approached.
Z
A maximum of two orders can be stored in
the truck’s memory. The destination
scanned in first is shown on the driver's
display as the current order. The second
destination scanned in is stored in the
truck’s memory. In this case the "order in
memory" symbol (216) is shown in the
driver's display.
• When the current order has been
processed it is deleted from the driver's
display and any order stored in the
memory is displayed.
• An order shown on the driver's display
can be deleted by pressing the “CE”
button twice on the numerical
keypad (112).
Z
Destinations can be inputted manually if the barcode scanner fails.
291
04.19 en-GB
To Next Page
Loading...
Need help?
General
