Destination input via data radio transmission
Requirements
– Prepare the truck for operation, see page 138 or see page 139.
– Drive the truck into the narrow aisle and establish automatic guidance, see
page 159.
Procedure
• The destination transmitted to the truck terminal by radio from the warehouse
management system is received by the industrial truck and appears directly on
the driver's display.
Destination entry with the truck terminal is now complete. The destination can now
be approached.
• When the current order has been processed, it is deleted from the driver's display.
• Feedback is sent from the industrial truck to the truck terminal.
• Subsequently, another destination sent to the truck terminal from the warehouse
management system via radio data transmission can be received and appears in
the driver's display.
• An order shown on the driver's display can be deleted by pressing the “CE” button
twice on the numerical keypad (112).
Z
Optionally, destinations can be entered manually if the truck terminal fails.
292
04.19 en-GB
To Next Page
Loading...
Need help?
General
