8.10.4 Lowering the work platform with the standard attachment
Requirements
– Prepare the truck for operation, see
page 138 or see page 139.
– Work platform raised securely, see
page 302.
– There are no people in the work
platform.
Procedure
• Raise or lower the work platform until it
is clear of the ground.
• Disconnect the work platform electrically
from the truck:
• Remove the connecting cable (238)
and hang it in the work platform.
• Fully extend the attachment and work
platform.
• Lower the forks until they are no longer
in contact with the work platform.
The mechanical lock (243) of the work platform is disconnected from the stop on
the load handler (244).
• Retract the forks to their home position.
The work platform has been lowered.
308
04.19 en-GB
To Next Page
Loading...
Need help?
General
