Hydraulic operations
Clean and lubricate the gear racks.
Note: The rotation cut-off disables the "fork carriage rotation" hydraulic function as soon
as a load greater than 500 kg is lifted above 2 m.
Test weight and height-dependent rotary cut-off.
Measure lifting and lowering speeds, if necessary traversing/rotating speeds for the
correct value.
Agreed services
Carry out a test run with the rated load or a customer-specific load.
Clean the motor housing of the travel and lift motor.
Demonstration after maintenance.
Lubricate truck according to the lubrication diagram.
Steering
Lubricate steering gear teeth or steering chain.
System components
Test lift, traction and other customer-specific cut-offs.
363
04.19 en-GB