1.2.1.2 Optional equipment
Wire guidance
System components
Measure the wire guidance current and frequency in the guide wire.
Test handling on the guide wire and maximum deviation and adjust if necessary.
Test the truck's acquisition of the guide wire when it enters the aisle.
Test the wire guidance system's "EMERGENCY STOP" function.
JH personal protection system
System components
Test the Personal Protection System.
Clean the front screens of the PPS laser scanner.
Test the warning and protective field areas of the Personal Protection System.
Rail guidance
Travel
Measure the distance between the guide rollers and the guide rails over the entire length
of the rails.
Fork adjuster
Hydraulic operations
Adjust the attachment.
Clean and grease attachment bearings, guides and stops.
The axial play of the front and rear rollers.
End of aisle safety device - magnet
System components
Test the function of the end of aisle safety device.
Rack height select
System components
Test Rack Height Select.
Aisle recognition
System components
Clean the magnetic switch and/or light switch for aisle recognition.
364
04.19 en-GB
To Next Page
Loading...
Need help?
General
