Load sensing
Hydraulic operations
Clean the sensors.
Test the sensors.
2nd stacking depth
System components
Test function and settings.
W&S lowering cut-off
Travel
Clean the sensors/switches.
Rack height select with automatic stacking operation
System components
Test the function of rack height select/automatic stacking.
Test the empty space check and load detection function of the rack height select/
automatic stacking.
Data radio
System components
Clean the scanner and terminal.
Video system
System components
Clean the camera.
Clean the display.
Support columns / Tilt safety devices
Chassis/structure
Measure the height-related and capacity-related settings.
Swivel traverse frame
Hydraulic operations
Adjust eccentric bolts on the swivel-traverse fork.
Adjust the attachment.
Clean and grease attachment bearings, guides and stops.
Clean and lubricate the attachment.
Adjust the pistons and piston rods.
365
04.19 en-GB
To Next Page
Loading...
Need help?
General
