• Push the battery (99) off the roller stand as far as the stop in the truck's battery
compartment (see arrow direction "E").
• Insert and lock the battery retainer (102):
• Insert the battery retainer (102) in the chassis (see arrow direction "C").
• Turn the handle (101) approx. 180° clockwise (see arrow direction "B").
• Fit the side panels (42):
• Insert the bottom section of the side panels (42) at an angle into the chassis
(see arrow direction "A").
• Pull up the side panels (42) and insert them in the chassis (see arrow
direction "A").
• Check all cables and connectors for visible signs of damage.
• Connect the battery connector (33) to the truck.
• Close the battery cover (29), see page 76.
When the battery has been installed, the truck is ready for operation.
85
04.19 en-GB
To Next Page
Loading...
Need help?
General
