Juniper EX3300 Series User Manual

Table 16: Optical Interface Support for SFP+ Gigabit Ethernet Transceivers (continued)
ValueSpecificationEthernet Standard
EX-SFP-10GE-LRMModel Number10GBASE-LRM
10 GbpsRate
LCConnector Type
DualFiber Count
1310 nmTransmitter Wavelength
–6.5 dBmMinimum Launch Power
0.5 dBmMaximum Launch Power
–21 dBmMinimum Receiver Sensitivity
0.5 dBmMaximum Input Power
MMFFiber Type
50/125 µm50/125 µm62.5/125µmCore/Cladding Size
OM3OM2FDDI/OM1Fiber Grade
500
MHz/km
500
MHz/km
500
MHz/km
Modal Bandwidth
220 m
(722 ft)
220 m
(722 ft)
220 m
(722 ft)
Distance
AvailableDOM Support
Junos OS for EX Series switches, Release 11.3 or laterSoftware required
Copyright © 2011, Juniper Networks, Inc.34
Complete Hardware Guide for EX3300 Ethernet Switches

Juniper EX3300 Series Specifications

General

Layer Support	Layer 2 and Layer 3
JUNOS OS	Yes
Ports	24 or 48 x 10/100/1000BASE-T ports
Uplink Ports	4 x 1GbE/10GbE SFP/SFP+ ports
Power Supply	AC or DC options
Stacking	Yes, up to 10 units
MAC Address Table Size	32, 000
Operating Humidity	10% to 90% non-condensing
PoE Support	Available on PoE models
Virtual Chassis	Yes, up to 10 units
Operating Temperature	32° to 104° F (0° to 40° C)