Juniper SRX1600 - Rack Requirements for the SRX1600

Figure 15: Clearance Requirements for Hardware Maintenance of SRX1600
Rack Requirements for the SRX1600
You can mount the SRX1600 on four-post racks. The rack mounng kit is shipped with the device. Table
25 on page 37 provides the rack requirements and specicaons for SRX1600.
Table 25: Rack Requirements and
Specicaons
Rack Requirement Guidelines
Rack type Use a four-post rack with bracket holes or hole paerns spaced at 1 U
increments (1.75 in. or 4.45 cm). Ensure that the rack meets the size and
strength requirements to support the weight.
A U is the standard rack unit as dened in Cabinets, Racks, Panels, and
Associated Equipment (document number EIA-310–D) published by the
Electronics Industry Associaon.
37