Juniper SRX1600 - Cooling System and Airflow in the SRX1600

Table 10: HA Port LEDs
Callout LED Descripon
1 Link (LED on the le)
• Blinking green—A link is established.
• O—There is no link established.
2 Acvity (LED on the right)
• Blinking green—There is acvity on the link.
• O—There is no link acvity.
Cooling System and Airow in the SRX1600
IN THIS SECTION
Fans | 20
SRX1600 Fan Module LEDs | 22
The cooling system in the SRX1600 consists of three fans. In addion to the fans, an internal fan in each
power supply unit (PSU) also cools the device components.
Fans
The fans in the SRX1600 are hot-insertable and hot-removable eld-replaceable units (FRUs). You can
install the fans in the fan module slots on the rear of the device.
20