Juniper SRX1600 - SRX1600 Installation Overview; Unpack the SRX1600; Tools and Parts Required to Unpack the SRX1600

SRX1600 Installaon Overview
To install and congure the SRX1600 :
1. Follow instrucons in "Unpack the SRX1600" on page 43 .
2. Install the rewall as described in "Install the SRX1600 in a Rack" on page 45 .
3. Connect cables to external devices as described in "Connect the SRX1600 to External Devices" on
page 62 .
4. Connect the grounding cable and power supplies as described in "Connect the SRX1600 to Power"
on page 55 . Power on the device.
5. Perform inial conguraon by following the instrucons in "Congure Junos OS on the SRX1600"
on page 64 .
RELATED DOCUMENTATION
SRX1600 Site Guidelines and Requirements | 33
Unpack the SRX1600
SUMMARY
Unpack the appliance with the recommended tools
and follow the recommended procedure.
IN THIS SECTION
Tools and Parts Required to Unpack the
SRX1600 | 43
Unpack an SRX1600 | 44
Verify Parts Received with the
SRX1600 | 44
Tools and Parts Required to Unpack the SRX1600
To unpack the device and prepare for installaon, you need the following tools:
43