against the items on the packing list. The packing list specifies the part numbers and
descriptions of each part in your order.
If any part is missing, contact your Juniper Networks customer service representative.
A fully configured SRX210 Services Gateway contains the chassis with installed
components, listed in Table 26 on page 62, and an accessory box, which contains the
parts listed in Table 27 on page 63.
NOTE: The parts shipped with your device can vary depending on the
configuration you ordered.
Table 26: Parts List for a Fully Configured SRX210 Services Gateway
QuantityComponent
1
•
For Low Memory model (SRX210B):
SRX210 Services Gateway with 2xGE + 6xFE ports,
1xMini-PIM slot, and base memory (512 MB RAM, 1GB Flash
memory)
•
For High Memory model (SRX210H):
SRX210 Services Gateway with 2xGE + 6xFE ports,
1xMini-PIM slot, and high memory (1 GB RAM, 1GB Flash
memory)
•
For High Memory model (SRX210H-TAA):
TAA Compliant SRX210 Services Gateway with 2xGE +
6xFE ports, 1xMini-PIM slot, and high memory (1 GB RAM,
1GB Flash memory)
•
For PoE model (SRX210H-POE):
SRX210 Services Gateway with 2xGE + 6xFE ports,
1xMini-PIM slot, high memory (1 GB RAM, 1 GB Flash), 4
ports of PoE 802.11AT (50 watts across 4 ports)
•
For PoE model (SRX210H-POE-TAA):
TAA Compliant SRX210 Services Gateway with 2xGE +
6xFE ports, 1xMini-PIM slot, high memory (1 GB RAM, 1 GB
Flash), 4 ports of PoE 802.11AT (50 watts across 4 ports)
•
For Voice model (SRX210H-P-MGW):
SRX210 Services Gateway with 2xGE + 6xFE ports,
1xMini-PIM slot, high memory (1GB RAM, 1GB Flash), 4
ports PoE (50 watts), and Media Gateway with 2 FXO
and 2 FXS ports
1
•
Power supply adapter (60 watts for Low Memory and
High Memory models)
•
Power supply adapter (150 watts for PoE and Voice
models)
13-prong power cord
NOTE: For SRX210H-TAA and SRX210H-POE-TAA models,
contact your Juniper Networks customer service
representative for more information.
Copyright © 2010, Juniper Networks, Inc.62
SRX210 Services Gateway Hardware Guide
To Next Page
Loading...
