Juniper SRX210 - HARDWARE GUIDE REV 3 - Page 81

Table 26: Parts List for a Fully Configured SRX210 Services
Gateway (continued)
QuantityComponent
1DB-9 to RJ-45 adapter, straight-through, 7 feet
Table 27: Accessory Parts List for the SRX210 Services Gateway
QuantityPart
1Juniper Networks Product Warranty
1End User License Agreement
1Quick Start Guide
1Security Products Safety Guide
1Juniper Compliance Form Letter
1Product Registration
1Tie wrap
NOTE: The mounting kits available for rack, wall, and desk installation of the
SRX210 Services Gateway must be ordered separately. Contact your Juniper
Networks customer service representative for more information.
NOTE: The Mini-PhysicalInterface Modules (Mini-PIMs) are notshipped with
the device.You have to order them separately. ContactyourJuniper Networks
customer service representative for more information.
Related
Documentation
• Required Tools and Parts for Installing and Maintaining the SRX210 Services Gateway
on page 59
• Unpacking the SRX210 Services Gateway on page 61
• Preparing the SRX210 Services Gateway for Rack-Mount, Desk-Mount, and Wall-Mount
Installation on page 65
63Copyright © 2010, Juniper Networks, Inc.
Chapter 10: Unpacking the SRX210 Services Gateway