DCE80-100E
Technical Handbook
Sidelift attachment
Service
23
P.Group 80
TDCE01
04GB
4. Reinstall the sliding plates. Fit sufficient number of shims un-
der the sliding plates to achieve 1-3 mm clearance between
sliding plates and main beam both horisontally and vertically.
This corresponds to the inside measures between the sliding
plates X + (1-3) mm and Y + (1-3) mm.
5. Using the LENGTH ADJUSTMENT function, retract the inner
beam to its inner position.
KL1801
KL1802
Höger sida
Vänster sida
To Next Page
Loading...
