MAINTENANCE
7-36
IMPORTANT: The machine is equipped with a
turbocharged engine. Cool down before stopping
the engine. Failure to do so may cause the lubricant
on the turbocharger bearing and seal surfaces to
dissipate due to the intense heat present inside the
turbocharger, possibly damaging the turbocharger.
4. Turn the key switch OFF to stop the engine. Leave the
machine untouched for 10 minutes.
5. Prepare a container of more than 50 L (13 gal) capacity to
receive the oil.
NOTE: Drain plug (5) is magnetized. If excessive amount of
metal pieces are found on drain plug (5), contact your nearest
authorized dealer.
6. Remove drain plug (5) from the transmission bottom to
drain the oil. Dispose of the oil in accordance with local
regulations.
7. Securely tighten drain plug (5).
NOTE: Do not apply sealant to drain plug (5).
5
MNEC-07-013
To Next Page
Loading...