Keithley 6485 User Manual

13
DISPlay, FORMat, and SYSTem
• DISPlay subsystem — Covers the SCPI commands that are used to control the
display.
• FORMat subsystem — Covers the SCPI commands to configure the format that
readings are sent over the bus.
• SYSTem subsystem — Covers miscellaneous SCPI commands.

Keithley 6485 Specifications

General

Model	Keithley 6485
Category	Picoammeter
Input Impedance	>10^14 Ohms
Voltage Burden	<200µV
Accuracy	0.4% of reading
Voltage Source Range	Not Applicable
Voltage Source Resolution	Not Applicable
Voltage Source Accuracy	Not Applicable
Interface	IEEE-488
Power Requirements	100V to 240V AC, 50/60Hz
Dimensions	89 mm high x 214 mm wide x 369 mm deep (3.5 in x 8.4 in x 14.5 in)