Keithley 6485 User Manual

7
Triggering
• Trigger models — Explains the various components of the trigger models which
control the triggering operations of the instrument. Also explains how to configure
the trigger model from the front panel.
• SCPI programming — Includes the commands used to configure the trigger
model and the commands to control the measurement process.
• External triggering — Explains external triggering which allows Model 6485 to
trigger other instruments and be triggered by other instruments.

Keithley 6485 Specifications

General

Model	Keithley 6485
Category	Picoammeter
Input Impedance	>10^14 Ohms
Voltage Burden	<200µV
Accuracy	0.4% of reading
Voltage Source Range	Not Applicable
Voltage Source Resolution	Not Applicable
Voltage Source Accuracy	Not Applicable
Interface	IEEE-488
Power Requirements	100V to 240V AC, 50/60Hz
Dimensions	89 mm high x 214 mm wide x 369 mm deep (3.5 in x 8.4 in x 14.5 in)