Keysight Technologies 33210A - Page 304

5 Error Messages
304 Keysight 33210A User’s Guide
-221
Settings conflict;
not able to sweep dc, sweep turned off
The function generator cannot generate a sweep using the dc voltage function.
The sweep mode has been turned off.
-221
Settings conflict;
not able to burst dc, burst turned off
The function generator cannot generate a burst using the dc voltage function. The
burst mode has been turned off.
-221
Settings conflict;
not able to burst pulse, burst turned off
The function generator cannot generate a burst using the pulse function. The
burst mode has been turned off.
-221
Settings conflict;
not able to burst arb waveforms, burst turned off
The function generator cannot generate a burst using the arbitrary waveform
function. The burst mode has been turned off.
-221
Settings conflict;
not able to burst noise, burst turned off
The function generator cannot generate a burst using the noise function. The
burst mode has been turned off.
-221
Settings conflict;
not able to sweep noise, sweep turned off
The function generator cannot generate a sweep using the noise function. The
sweep mode has been turned off.