Keysight 81160A - Page 496

Appendix
496
Command
:SWE[1|2]:SPAC[?]
Long
[:SOURce]:SWEep[1|2]:SPACing[?]
Parameters
{LINear|LOGarithmic}
Parameter Suffix

Description
Select linear or logarithmic spacing for the sweep. The default is LINear. The
:SWE[1|2]:SPAC? query returns “LIN” or “LOG”.
 For a linear sweep, the instrument varies the output frequency in a linear
fashion during the sweep.
 For a logarithmic sweep, instrument varies the output frequency in a
logarithmic fashion during the sweep.
Example
:SWE2:SPAC LOG