Chapter 6 193
Replacement Procedure
Front BNC Connector Replacement
6. Replacement Procedure
Figure 6-30 Front BNC Connector Removal
Replacement Procedure
Step 1. When the diode is replaced, cut the new diode leads as show in the figure (item 7).
Solder the new diode as show in the figure (item 8).
NOTE Ensure that the polarity of the diode is correct.
Step 2. Replace the front BNC connector by inverse procedure of removal.
e5052bse1098
15
Rear
Front
15
6
2
5 6
34
8 78
1
To Next Page
Loading...
