Keysight E5052B - Power Measurement Accuracy Test

Chapter 2 21
Performance Tests
Individual Test Description
2. Performance Test
3. Power Measurement Accuracy Test
Description
This test checks the RF power measurement accuracy of the E5052B. The measurement
power level for this test is set at -20 dBm to 20 dBm in 10 dB step.
Test equipment
Signal Generator Keysight E8257D with Opt. UNX, UNT, 1EA
without Opt. UNW, 1EH
RF Amplifier (AMP 1) R&K A3000-2H-R
RF Amplifier (AMP 2) Keysight 83020A
Power Meter Keysight E4419B
Power Sensor Keysight E9304A Opt. H18 or Keysight E9304A
Opt. H19
Step Attenuator Keysight 8496H
Power Splitter Keysight 11667A
Blocking Capacitor Keysight 11742A
N(f)-SMA(m) adapter, 2 ea. Keysight p/n 1250-1562
3 dB Fixed Attenuator, 2 ea. Keysight 8491A Opt.003
N(m)-N(m) cable 61cm, 3 ea. Keysight N6314A (p/n 8120-8862)
N(m)-N(m) Adapter Keysight p/n 1250-1475
BNC cable, 122cm Keysight p/n 8120-1840