Appendix B 205
System Recovery
System Recovery
B. System Recovery
Notes on executing the factory recovery function
Executing the factory recovery function causes the following conditions:
o In addition to the Windows operating system and the firmware, the following settings
of the E5052B are returned to the factory state.
• Network setting
• GPIB setting
• Printer setting
o The driver for the supported printer installed after purchase is deleted.
o You need to execute initial registration again.
Files you created using the save function (files in the F drive) are not affected, but we
recommend backing them up before executing system recovery for precautionary
purposes. For more information on backup, refer to “Backing Up the Data” as described in
E5052B Online Help.
To Next Page
Loading...
