44 Chapter 3
Adjustment
Required Adjustment after Replacing Assembly
DC Control Voltage Adjustment
The purpose of this procedure is to adjust the DC control voltage of the DC source of the
A2 DC Source board.
Required equipment for DC control voltage adjustment
DC Power Voltage Adjustment
The purpose of this procedure is to adjust the DC power voltage of the A2 DC source
board.
Required equipment for the DC power voltage adjustment
DC Power Current Adjustment
The purpose of this procedure is to adjust the DC power current measurement of the A1
freq/power detector module.
Required equipment for the DC power current adjustment
Description Recommended Model
Multimeter Keysight 3458A, Keysight 34401A, Keysight
34410A or Keysight 34411A
BNC(f)-Banana Adapter Keysight p/n 1251-2277
BNC(m)-BNC(m) Cable, 61 cm Keysight p/n 8120-1839
Description Recommended Model
Multimeter Keysight 3458A, Keysight 34401A, Keysight
34410A or Keysight 34411A
BNC(f)-Banana Adapter Keysight p/n 1251-2277
BNC(m)-BNC(m) Cable, 61 cm Keysight p/n 8120-1839
Description Recommended Model
Multimeter Keysight 3458A, Keysight 34401A, Keysight
34410A or Keysight 34411A
141 ohm Load Keysight p/n 0698-3615 (47 Ω), 3ea
BNC(f)-Banana Adapter Keysight p/n 1251-2277
BNC Tee Adapter Keysight p/n 1250-0781
BNC(m)-BNC(m) Cable, 61 cm Keysight p/n 8120-1839
To Next Page
Loading...
