70 Chapter 4
Troubleshooting
Function Specific Troubleshooting
To Check the Device Driver
Make sure first whether the E5052B device drivers are installed properly or not by the
following procedure, if a function of specific device in the E5052B doesn't work.
Step 1. Exit from the E5052B measurement view in accordance with the procedure described in
“How to exit from the E5052B Measurement View” on page 55. Then, Windows desktop
screen is displayed.
Step 2. Right-click "My Computer" and select "Properties" as shown in Figure 4-15. Then, the
System Properties (Figure 4-16) will appear.
Figure 4-15 Opening System Property Window
Oven A 10 MHz high stability signal is outputted. Refer to in “To Check the
Oven Ch1” on page 75 or
“To Check the Oven Ch2” on
page 76.
USB (USBTMC)
Interface
The GPIB compatibility allows the E5052B to be
operated as a talker/listener on IEEE 488 interface
bus.
Refer to in “To Check the
USB (USBTMC) Interface
Card” on page 77.
Table 4-2 Major functions and troubleshooting procedures
Function Description Troubleshooting
To Next Page
Loading...
