206 Appendix B
System Recovery
System Recovery
Procedure to execute the factory recovery (HDD Revision: NM321 or
above)
NOTE The recovery function for Factory image is only loaded.
The User back up function is not available.
Step 1. Turn ON the E5052B.
Step 2. The boot option is displayed. Use the downward arrow key to select the “Keysight
Recovery Solution” and press Enter
Step 3. Windows PE starts up and “Keysight Recovery Program” window is displayed. Press 1,
and then press Enter.
Figure B-1 Keysight Recovery Program(1/1)
Step 4. A warning message is displayed. Press 1, and then press Enter.
Figure B-2 Keysight Recovery Program(1/2)
Step 5. Caution is displayed. Press 1, and then press Enter.
To Next Page
Loading...
