Keysight E5052B - Phase Noise BW Adjustment; FLL BW Adjustment

Chapter 3 51
Adjustment
Required Adjustment after Replacing Assembly
1. Chapter Title
2. Chapter Title 3. Adjustment
4. Chapter Title
5. Chapter Title
Phase Noise BW Adjustment
The purpose of this procedure is to adjust the phase noise BW of the phase detector board.
Required equipment for the phase noise BW adjustment
FLL BW Adjustment
The purpose of this procedure is to adjust the frequency lock loop BW of the phase detector
board.
Required equipment for the FLL BW adjustment
Description Recommended Model
Signal Generator Keysight E8257D with Opt. UNX, UNT, 1EA
without Opt. UNW, 1EH
N(m)-N(m) Cable Keysight N6314A (p/n 8120-8862)
Description Recommended Model
Signal Generator Keysight E8257D with Opt. UNX, UNT, 1EA
without Opt. UNW, 1EH
N(m)-N(m) Cable Keysight N6314A (p/n 8120-8862)