Keysight E5052B - E5052 B Performance Test Calculation Sheet; Introduction; Phase Noise Accuracy Test

Chapter 2 27
Performance Tests
E5052B Performance Test Calculation Sheet
2. Performance Test
E5052B Performance Test Calculation Sheet
Introduction
This section contains calculation sheets for each performance test that requires additional
calculations to determine the final test result.
Use the calculation sheet in this section as an aid for recording raw measurement data and
calculating the performance test results.
Calculation sheet entries are provided only for performance tests in which calculations are
required to obtain the test results.
Phase Noise Accuracy Test
Table 2-2 Sheet for Reference Frequency (10 MHz)
Offset
Frequency
[Hz]
E5052B
reading
[dBm]
Power Meter reading
[dBm]
Cal value of
Setp Att [dB]
Test Result
[dB]
Test Result
equation
E5052B SG1 SG2 SATT Result
-1 M
Result =
E5052B
Reading - (SG1 -
(SG2 - SATT))
-1 k
-100
100
1 k
1 M