Keysight E5052B - SSB Phase Noise Sensitivity Test

Chapter 2 23
Performance Tests
Individual Test Description
2. Performance Test
5. SSB Phase Noise Sensitivity Test
Description
This test checks the SSB phase noise sensitivity of the E5052B. The carrier frequency for
this test is 70 MHz.
Test equipment
Signal Generator Keysight E8257D with Opt. UNX, UNT, 1EA
without Opt. UNW, 1EH
Band Pass Filter 70 MHz, Band width 10 kHz,
FILTRONETICS FN-2063M
N(m)-N(m) cable 61cm, 2 ea. Keysight N6314A (p/n 8120-8862)
N(f)-BNC(m) Adapter, 2 ea. Keysight p/n 1250-1477