265
Keysight Technologies
N9040B UXA Signal Analyzer
Service Guide
13 Service and Diagnostics Menus
Overview
The Service capabilities described below are accessed via the Service menus in
the System Settings Diagnostic menu and Spectrum Analyzer mode Measure
Setup menu. The Service capabilities are intended for field service technicians.
These technicians may be at a Keysight Service Center or at a self-maintaining
customer site.
There are two types of Service capabilities:
1. Diagnostics - These are available to any user and will assist in initial
troubleshooting of instrument malfunctions. Examples are the ability to
read the mechanical relay cycles.
2. Service Functions - These are for use by the factory or field repair
technicians, access is controlled. Examples are the ability to band lock the
analyzer and control the DAC which sets the 10 MHz Reference frequency.
To Next Page
Loading...
Need help?
General
