Keysight N9040B Option 508 - All Replaceable Parts

292 Keysight Technologies N9040B UXA Signal Analyzer Service Guide
Replaceable Parts
ESD Cap, GPIB Connector 1252-5007
ESD Cap, VGA Connector 1252-0220
Type-N Connector O-ring 8160-1637
Front Frame Removal Warning Label N9030-80018
W1 Cable, Ribbon, A1A2, Front Panel Interface to A7J32, Rear Motherboard N9040-60030
W2 Cable, Semi-rigid, RF Input Connector to Attenuator A
Option CNF
Option C24
Option C35
N9040-20025
N9040-20114
N9040-20043
W3 Cable, Semi-rigid, Cal In to Attenuator, A16J701, Reference Assembly to Attenuator A
Options 508, 513, 526
Options 544, 550
N9040-20027
N9040-20103
W4 Cable, Semi-rigid, Attenuator B to Attenuator A
Options 508, 513, 526
Options 544, 550
N9040-20026
N9040-20102
W5 Cable, Ribbon, Attenuator A/B to A15J800, Front End Controller
Options 508, 513, 526
Options 544, 550
N9040-60032
N9040-60065
W6 Cable, Wire Harness, Switch 1/2 and B5X Switches to A15J801, Front End Controller
(Option B5X)
N9040-60031
W7 Cable, Ribbon, A11J4, Low Band Switch to A15J700, Front End Controller
Options 508, 513, 526
Options 544, 550
N9040-60036
N9040-60066
W8 Cable, Semi-rigid, A13J2, R.F. Front End Assembly to A11J2, Low Band Switch
Options 508, 513, 526
Options 544, 550
N9040-20032
N9040-20108
W9 Reserved
W10 Cable, Semi-rigid, Switch 1 port 2 to YTF In N9040-20033
W11 Cable, Wire harness, A12J1, YTF to A15J300, Front End Controller N9040-60033
W12 Wire harness, Switch 1/2 to A15J801, Front End Controller
Wire harness, 4 Switch Control (Option B5X)
N9040-60039
N9040-60031
Table 14-1 All Replaceable Parts
Reference
Designator
Description Part Number