Keysight N9040B Option 508 User Manual

324 Keysight Technologies N9040B UXA Signal Analyzer Service Guide
Replaceable Parts
W16 Cable, Coax, A13J7, R.F. Front End Assembly to A15J902,
Front End Controller
Options 508, 513, 526
Options 544, 550
8121-2608
8121-2027
W18 Cable, Semi-rigid, A16J702, Reference Assembly to A13J1,
R.F. Front End Assembly
Options 508, 513, 526
Options 544, 550
N9040-20039
N9040-20113
W22 Cable, Ribbon, A13J12, R.F. Front End Control to A15J102,
Front End Controller
N9040-60037
W25 Cable, Coax, A15J900, Front End Controller to A2J100, Analog
I.F. Assembly
8121-1865
W26 Cable, Coax, A15J901, Front End Controller to A3J15,
Narrowband Digital I.F. Assembly (Std, Option B25, B40)
8121-1919
W27 Cable, Coax, A15J1100, Front End Controller to Aux IF Out
Rear Panel
8121-1859
W28 Cable, Ribbon, A15J1300, Front End Controller to A13A2J1,
Switched Filter Assembly
N9040-60034
W30 Cable, Coax, A13J13 R.F. Front End Assembly to A15J903,
Front End Controller
Options 508, 513, 526
Options 544, 550
8121-1940
8121-2608
W31 Cable, Semi-rigid, A16J703, Reference Assembly to FL1, 7.2
GHz Bandpass Filter
N9040-20040
W33 Cable, Coax, A13J6, R.F. Front End Assembly to A16J705,
Reference Assembly
8121-1940
W34 Cable, Coax, A16J718, Reference Assembly to A21J4,
Wideband Analog I.F. Assembly (Option B2X and B5X)
8121-0152
W36 Cable, Coax, A16J711, Reference Assembly to A2J300, Analog
I.F. Assembly
8121-1919
W37 Cable, Coax, Ext Ref In Rear Panel to A16J704, Reference
Assembly
8121-1863
W39 Cable, Coax, A16J716, Reference Assembly to A3J14, Digital
I.F. Assembly
8121-1861
W41 Cable, Coax, A15J901, Front End Controller to A21J17,
Wideband Analog I.F. Assembly (Options B2X and B5X)
8121-1401
Table 14-11 Reference Assembly and Front End Controller Cables
Item Description Keysight Part Number

Keysight N9040B Option 508 Specifications

General

Phase Noise	-136 dBc/Hz at 1 GHz and 10 kHz offset
Input Impedance	50 Ω
Input VSWR	< 1.5:1
Resolution Bandwidth (RBW)	1 Hz to 8 MHz
Input Power Range	+30 dBm
Analysis Bandwidth	40 MHz
Sweep Time	1 ms to 1000 s