Kohler KDI 1903M Workshop Manual

INFORMATION ABOUT OPTIONAL
COMPONENTS
11
157
EN
3.
Position the flange K on the crankcase Q inserting
the gasket P, and inserting the gear N up to the
stop on the bearing R (Fig. 11.41).
4.
Secure the flange K using the screws N (tightening
torque at 25 Nm).
Fig 11.28
Important
•
Always replace the gasket V after each assembly.
5.
Insert the gasket V on the cover F, insert and
position the cover F on the flange K.
6.
Secure the cover F using the screws E on the
flange K (tightening torque at 25 Nm)
Fig 11.29
Important
•
Always replace the gasket T after each assembly.
7.
Position and secure the flange D using the screws
C on the crankcase S (tightening torque at 10 Nm).
Fig 11.30
Important
•
Always replace the gasket U after each assembly.
8.
Position the gasket U on the flange D.
9.
Secure the pump B using the screws A on the
flange D (tightening torque at 25 Nm).
Fig 11.31

Kohler KDI 1903M Specifications

General

Brand	Kohler
Model	KDI 1903M
Category	Engine
Language	English