Kohler KDI 1903M Workshop Manual

GLOSSARY
15
185
EN
F
Fig.:
Figure.
Functional
units:
Component, or group of main components, able to carry out specific functions on
the engine.
G
Galvanised:
Material that has undergone surface protection treatment.
Grinding (valves
and seats):
Cleaning operation of the valves and seats carried out with an abrasive paste
(refer to an authorised service station for this type of operation).
H
Heater:
A device that heats the intake air by means of an electrical resistor.
Heavy
conditions:
Type of extreme condition referred to the work environment in which the engine is
used (very dusty - dirty area, or in a contaminated environment due to various types
of gas).
I
Idle speed operation:
Operation of a running engine with the vehicle stopped and on idle speed.
K
KDI:
"Kohler Direct Injection"
M
Maintenance -
periodic
A group of maintenance actions that have the sole objective to control and replace
elements on their expiry, without modifying or improving the functions carried out
by the system, neither increasing the value nor improving performance.
MAX:
Maximum.
Methyl ester:
It is a mixture of products by means of a chemical conversion of oils and animal
and/or vegetable fat, which is used to produce Biofuel.
Min.:
Minutes.
MIN:
Minimum.
Model:
Model, engine identification plate, which indicates the engine's model.

Kohler KDI 1903M Specifications

General

Brand	Kohler
Model	KDI 1903M
Category	Engine
Language	English