3.4 Prohibited Use
Other use than that described in chapter “Use as directed” is not intended and can lead to per-
sonnel injuries and equipment damage.
The use of the servo amplifier in the following environments is prohibited:
potentially explosive areas,
environments with corrosive and/or electrically conductive acids, alkaline solutions, oils,
vapors, dusts,
directly on non-grounded supply networks or on asymmetrically grounded supplies with a
voltage >240V,
ships or offshore applications.
Commissioning the servo amplifier is prohibited if the machine in which it was installed,
does not meet the requirements of the EC Machinery Directive,
does not comply with the EMC Directive,
does not comply with the Low Voltage Directive.
The control of holding brakes by the S700 alone may not be used in applications, where func-
tional safety is to be ensured with the brake.
S748-772 Instructions Manual | 3 Safety
Kollmorgen | kdn.kollmorgen.com | July 2019 17
To Next Page
Loading...
