SAFETY FIRST
This symbol, the industry's "Safety Alert Symbol", is
used throughout
this manual and on labels on the
machine itself to warn of the possibility of personal
injury. Read these instructions carefully. It is essential
that you read the instructions and safety regulations
before you try to repair or use this unit.
DANGER
• Indicates an
imminently hazardous situation
which, if not avoided, will result in death or
serious injury.
WARNING
• Indicates
a
potentially hazardous situation
which, if not avoided, could result in death or
serious injury.
CAUTION
• Indicates a potentially hazardous situation
which, if not avoided, could result in minor or
moderate injury.
IMPORTANT
• Indicates that
equipment or property damage
could result if instructions are not followed.
NOTE
• Gives helpful information.
1. W
orking precautions
• Understand all
safety instructions and safety labels
in this manual.
• Park the machine on a stable and level ground then
lower the attachment to check the machine safely.
• Stop the engine and remove the key when leaving
the operator's seat for cleaning, maintenance, and
servicing.
• Hang a DO NOT OPERATE tag near the operator's
seat.
• Do not use worn or cracked tools. Use tools in a
proper way with enough strength.
• In regards to the facility which is used in the work
shop, follow each safety instruction.
2. Preparing for emergencies
• Keep a first aid kit and fire extinguisher ready at all
times.
•
Keep emergency numbers near your telephone at
all times.
SAFETY FIRST
1. Working precautions 1. SAFETY
D1803-CR-E4,D1803-CR-TE4,D1803-CR-TIE4,V2403-CR-E4,V2403-CR-TE4,V2403-CR-TE4BG,V2403-CR-TIE4
To Next Page
Loading...
