Kubota D1803-CR-E4 - Removing Fuel Camshaft Assembly; Removing Idle Gear

2. Remove the O-ring (2).
3.
Remove the crankshaft oil slinger (1).
(1) Crankshaft oil slinger
(2) O-ring
(3)
Crankshaft collar
5.28 Removing idle gear
Tools required
• Gear puller
•
Flywheel stopper
1. Mount a flywheel stopper (1) on the flywheel.
(1) Flywheel stopper
2. Loose the oil pump drive gear 1 mounting nut (5).
3. Remove
the
oil pump drive gear 2 (4) with gear
puller.
4. Remove the idle gear collar (2).
5. Remove the idle gear (3).
(2) Idle gear collar
(3) Idle gear
(4)
Oil pump drive gear 2
(5) Oil pump drive gear 1
mounting nut
5.29 Removing fuel camshaft
assembly
1. Remove the fuel camshaft stopper (1).
2. Pull out the fuel camshaft assembly (2).
(1) Fuel camshaft stopper (2) Fuel camshaft assembly
SERVICING
5. Disassembling 4. ENGINE
D1803-CR-E4,D1803-CR-TE4,D1803-CR-TIE4,V2403-CR-E4,V2403-CR-TE4,V2403-CR-TE4BG,V2403-CR-TIE4
4-127
KiSC issued 12, 2018 A