Kubota D1803-CR-E4 - System Wiring Diagram for D1803-CR-E4, D1803-CR-TE4, V2403-CR-E4, V2403-CR-TE4, V2403-CR-TE4 BG

6.4 System wiring diagram for D1803-CR-E4, D1803-CR-TE4, V2403-CR-E4,
V2403-CR-TE4, V2403-CR-TE4BG
D1803-CR-E4, D1803-CR-TE4, V2403-CR-E4, V2403-CR-TE4, V2403-CR-TE4BG
(1) Main relay (13) Injector 1 (25) Rail pressure sensor
(2) Fuel feed pump (14) Injector 4
*
(26) Boost pressure sensor
(3) CAN1 connector (for service) (15) Injector 3 (27) Stop switch
(4) CAN2 connector (for vehicle) (16) Injector 2 (28) Parked regeneration switch
(5) EGR valve (17) Crankshaft position sensor (29) Parking switch
(6) Starter (18) Camshaft position sensor (30) Regeneration inhibit switch
(Continued)
GENERAL MACHINE INFORMATION
6. Wiring diagram 2. GENERAL
D1803-CR-E4,D1803-CR-TE4,D1803-CR-TIE4,V2403-CR-E4,V2403-CR-TE4,V2403-CR-TE4BG,V2403-CR-TIE4
2-29
KiSC issued 12, 2018 A