4. Starting the machine safely
• Do not do the following work when staring the
engine.
–
Short across starter terminals.
– Bypass the safety start switch.
• Confirm if it is safe around the machine from the
operator's seat before starting the engine.
• Do not start the engine unless seating in the
operator's seat.
• Make sure that the pilot levers are in neutral before
starting the engine.
• Lock the covers before starting the machine.
• Keep away from rotating and moving objects.
•
Keep tools and waste cloth away from rotating and
moving objects.
5. Preventing fires
• Keep fire (welding sparks, grinding sparks,
cigarettes) away from the fuel.
•
Wipe the fuel off when spilled.
• Keep fire (welding sparks, grinding sparks,
cigarettes) away from the battery. The battery
produces oxygen and hydrogen gas that are
flammable.
• Make sure to disconnect the negative (-) terminal
first when disconnecting the battery cable.
• Make sure to connect the positive (+) terminal first
when connecting the battery cable.
• Follow notes on handling diesel particulate filter
(DPF).
• Do not make a short-circuit.
• Do not splash the hydraulic oil on the exhaust
components.
SAFETY FIRST
4. Starting the machine safely 1. SAFETY
D1803-CR-E4,D1803-CR-TE4,D1803-CR-TIE4,V2403-CR-E4,V2403-CR-TE4,V2403-CR-TE4BG,V2403-CR-TIE4
To Next Page
Loading...
