3. Connect the air flow sensor intermediate harness (engine side).
(24) Air flow sensor intermediate
connector (6P)
(25) Air flow sensor connector (5P)
4. Connect the DPF intermediate harness (engine side).
(4) Name plate
(26) DPF intermediate connector
(16P)
(27)
Exhaust gas temperature sen-
sor (T2) (2P)
(28) Exhaust gas temperature sen-
sor (T1) (2P)
(29) Exhaust gas temperature sen-
sor (T0) (2P)
(30) Differential pressure sensor
(ΔP) (3P)
(l) Clamp
5. Connect the engine ECU intermediate harness.
(31) Injector intermediate harness (32) Engine intermediate harness (33) DPF intermediate harness
4. ENGINE
SERVICING
6. Assembling
D1803-CR-E4,D1803-CR-TE4,D1803-CR-TIE4,V2403-CR-E4,V2403-CR-TE4,V2403-CR-TE4BG,V2403-CR-TIE4
To Next Page
Loading...
