2PV/2PW
1-3-63
U640 Setting communication time 1
Description
Sets the detection time when one-shot detection is selected for remote switching. (This setting
item will be displayed, but the setting made is ineffective.)
Sets the detection time when continuous detection is selected for remote switching. (This setting
item will be displayed, but the setting made is ineffective.)
Method
1. Press the start key.
2. Select the item to be set using the cursor up/down keys.
Setting the one-shot detection time for remote switching
1. Change the setting using the cursor left/right keys.
2. Press the start key. The value is set.
Setting the continuous detection time for remote switching
1. Change the setting using the cursor left/right keys.
2. Press the start key. The value is set.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description
Time (One) Sets the one-shot detection time for remote switching.
Time (Cont) Sets the continuous detection time for remote switching.
Description Setting range Initial setting
One-shot detection time for remote switching 0 to 255 7
Description Setting range Initial setting
Continuous detection time for remote switching 0 to 255 80
To Next Page
Loading...
Need help?
General
