2PV/2PW
1-3-31
U251 Checking/clearing the maintenance count
Description
Displays, clears and changes the maintenance count.
Purpose
To check the maintenance count.
Also to clear the count during maintenance service (replacing the maintenance kit).
Method
1. Press the start key. The maintenance count is displayed.
Setting
1. Select [M.Cnt A] using the cursor up/down keys.
2. Change the setting using the cursor left/right keys or numeric keys.
3. Press the start key. The count is set.
Clearing
1. Select [Clear] using the cursor up/down keys.
2. Press the start key. The count is cleared.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Description Setting range Initial setting
Maintenance count 0 to 9999999 0
To Next Page
Loading...
Need help?
General
