2PV/2PW
1-3-14
U010 Set Mainte ID
Description
Maintenance mode ID for markets is changed.
Purpose
The brittleness of a security function is improved by changing maintenance mode ID for markets.
Method
1. Press the start key.
2. Select the item to be set.
[Setting: Change]
1. Select the [New ID(Reconfirm)].
2. New ID is inputted using a ten key.
* : New ID of 8 figures is taken as the arbitrary combination of 0 to 9, *, and #.
(* or # is certainly included)
3. Select the [Excute].
4. Press the start key. ID is set.
5. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.
[Setting: Initialaize]
1. Select the [Excute].
2. Press the start key. ID is intialized.
3. Turn the main power switch off and on. Allow more than 5 seconds between Off and On.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description
Change Maintenance mode ID for markets is changed.
Initialize Maintenance mode ID for markets is initialized.
To Next Page
Loading...
Need help?
General
