2PV/2PW
1-3-12
U001 Exit Maintenance Mode
Description
Exits the maintenance mode and returns to the normal copy mode.
Purpose
To exit the maintenance mode.
Method
1. Press the start key. The normal copy mode is entered.
U002 Setting the factory default data
Description
Restores the machine conditions to the factory default settings.
Purpose
To move the image scanner unit to the home position.
Method
1. Press the start key.
2. Select [Mode1(All)] using the cursor up/down keys.
3. Press the start key.
The imege scanner unit returns to the home position.
4. Turn the main power switch off and on.
* : An error code is displayed in case of an initialization error.
When errors occurred, turn main power switch off then on, and execute initialization using
maintenance item U002.
Error codes
Item No. Description
Codes Description
0001 Controller error
0020 Engine error
0040 Scanner error