Kyocera Ecosys M6526cdn Service Manual

2PV/2PW
1-3-35
U332 Setting the size conversion factor
Description
Rate: Setting a factor to convert a non-standard size paper to A4/Letter. The coefficient set here
is used to convert the black ratio in relation to the A4/Letter size and to display the result in user
simulation.
Mode: Make settings on the color copy and color print coverage counter displays, as well as the
coverage threshold.
Method
1. Press the start key.
2. Select the item to set.
Setting: [Rate]
Purpose: To set the coefficient for converting the black ratio for nonstandard sizes in relation to
the A4/Letter size.
1. Change the setting using the +/-keys or numeric keys.
2. Press the start key. The value is set.
Setting: [Mode]
Purpose: Make settings on the color copy and color print color/coverage counter displays.
1. Select the mode.
Initial setting: 0
* : If ‘0’ has been changed to ‘1’, revert the U260 feed/eject counter switch to its initial state
(Eject).
2. Press the start key. The setting is set.
Setting: [Level 1/2]
Purpose: Setting the coverage thresholds to segment the color count depending on the density
level of 1, 2, and 3, for the counters of color copying and color printing.
* : The coverage threshold will be used to categorize the following counters when using
U920.
Color Copy(H), Color Copy(M), Color Copy(L)
Color Prn(H), Color Prn(M), Color Prn(L)
Item No. Description
Display Description
Rate Size coefficient
Mode Toggling full-color count and color coverage count display
Level 1 Low coverage threshold value
Level 2 Middle coverage threshold value
Display Description Setting range Initial setting
Rate Size coefficient 0.1 to 3.0 1.0
Display Description
0 Full-color count display
1 Color coverage count display

Kyocera Ecosys M6526cdn Specifications

General

Brand	Kyocera
Model	Ecosys M6526cdn
Category	All in One Printer
Language	English