Kyocera Ecosys M6526cdn Service Manual

2PV/2PW
1-5-35
(4) Detaching and refitting the high voltage PWB
Procedure
1. Remove the right rear cover and right
cover (see page 1-5-6).
2. Remove the FFC from the high voltage
PWB.
Figure 1-5-52
3. Remove the screw.
4. Release eight hooks and then remove
the high voltage PWB.
5. Check or replace the high voltage PWB
and refit all the removed parts.
Figure 1-5-53
FFC
High voltage PWB
High Voltage PWB
Hook
Hook
Hook
Hook
Hooks
Hooks
Screw

Kyocera Ecosys M6526cdn Specifications

General

Brand	Kyocera
Model	Ecosys M6526cdn
Category	All in One Printer
Language	English