2PV/2PW
2-4-16
Adjusting the DP center line (alternative command for the maintenance mode U072)
Description
Adjusts the scanning center line for the DP original.
Purpose
Make the adjustment if there is a regular error between the centers of the original and the copy image when
the DP is used.
Example: FRONT set to 15, BACK set to 3
!R! KCFG “SCAN”,3,1,15; KCFG “SCAN”,3,2,3;EXIT;
DP center line
Format !R! KCFG “SCAN”,3, #1,#2;EXIT;
Parameter #1 1: FRONT Center line (first page)
2: BACK Center line (second page)
3: ROTATE Center line (rotated scan)
#2 Setting range: -39 to 39 (in 0.086mm increment) (initial: 0)
Original Copy
example 1
Copy
example 2
To Next Page
Loading...
Need help?
General
