EasyManuals Logo

Kyocera Ecosys M6526cdn Service Manual

Kyocera Ecosys M6526cdn
375 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #356 background imageLoading...
Page #356 background image
2PV/2PW
2-4-3
(3) Firmware environment commands
The printer maintains a number of printing parameters in its memory. There parameters may be changed per-
manently with the FRPO (Firmware RePrOgram) commands.
This section provides information on how to use the FRPO command and its parameters using examples.
Using FRPO commands for reprogramming firmware
The current settings of the FRPO parameters are listed as optional values on the service status page.
Note: Before changing any FRPO parameter, print out a service status page, so you will know the parameter
values before the changes are made. To return FRPO parameters to their factory default values, send the
FRPO INIT (FRPO-INITialize) command.(!R! FRPO INIT; EXIT;)
The FRPO command is sent to the printer in the following sequence:
!R! FRPO parameter, value; EXIT;
Example: Changing emulation mode to PCL6
!R! FRPO P1, 6; EXIT;
FRPO parameters
Item FRPO Setting values
Factory
setting
Default pattern resolution B8 0: 300 dpi
1: 600 dpi
0
Page orientation C1 0: Portrait
1: Landscape
0
Default font No. * C2
C3
C5
Middle two digits of power-up font
Last two digits of power-up font
First two digits of power-up font
0
0
0
PCL font switch
C8 0: HP compatibility mode
32: Conventional compatibility mode
0
Total host buffer size H8 0 to 99 in units of the size defined by FRPO S5 5
Form feed time-out value H9 Value in units of 5 seconds (1 to 99) 6
Duplex mode
N4 0: Off
1: Long edge binding
2: Short edge binding
0
Sleep timer time-out time N5 Value in units of 1 minute (1 to 240) 1
Ecoprint level N6 0: Off
2: On
0

Table of Contents

Other manuals for Kyocera Ecosys M6526cdn

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Kyocera Ecosys M6526cdn and is the answer not in the manual?

Kyocera Ecosys M6526cdn Specifications

General IconGeneral
Print TechnologyLaser
Copy Resolution600 x 600 dpi
Duplex PrintingYes
Paper Capacity250 sheets
FunctionsPrint, Copy, Scan, Fax
Fax Speed33.6 kbps
Mobile Printing SupportYes
Paper Output Capacity150 sheets
Max Paper SizeA4
Print Resolution1200 x 1200 dpi
Scan Resolution600 x 600 dpi
ConnectivityUSB 2.0, Ethernet
Warm-up Time29 seconds
Duty Cycle50, 000 pages per month
Recommended Monthly Print VolumeUp to 3, 000 pages
First Copy Out Time10 seconds
Zoom Range25% - 400%
Scan toEmail, FTP, SMB, USB
Fax Resolution300 x 300 dpi
Memory512 MB
Supported Paper SizesA4, A5, A6, B5, Letter, Legal

Related product manuals