2PV/2PW
1-3-36
U332
1. Select the item.
2. Change the setting using the +/-keys or numeric keys.
3. Press the start key. The value is set.
Completion
Press the stop key.
* : The screen for selecting a maintenance item No. is displayed.
U345 Setting the value for maintenance due indication
Description
Sets when to display a message notifying that the time for maintenance is about to be reached,
by setting the number of copies that can be made before the current maintenance cycle ends.
When the difference between the number of copies of the maintenance cycle and that of the
maintenance count reaches the set value, the message is displayed.
Purpose
To change the time for maintenance due indication.
Setting
1. Press the start key.
2. Select [Cnt] using the cursor up/down keys.
3. Change the setting using the cursor left/right keys.
4. Press the start key. The value is set.
Clearing
1. Select [Clear] using the cursor up/down keys.
2. Press the start key. The value is cleared.
Completion
Press the stop key. The screen for selecting a maintenance item No. is displayed.
Item No. Description
Display Description Setting range Initial setting
Level 1 Low coverage threshold value 0.1 to 99.8 1.0
Level 2 Middle coverage threshold value 0.2 to 99.9 2.5
Description Setting range Initial setting
Time for maintenance due indication
(Remaining number of copies that can be made
before the current maintenance cycle ends)
0 to 9999 0
To Next Page
Loading...
Need help?
General
