2-51
Installing and Setting up the Machine > Command Center RX
Changing Security Settings
1
Display the screen.
1 Launch your Web browser.
2 In the address or location bar, enter the machine's IP address or the host name.
Click in the following order to check the machine's IP address and the host name.
[System Menu/Counter] key > [] [] key > [Report] > [OK] key > [] [] key > [Report Print] > [OK] key > [] []
key > [Status Page] > [OK] key > [Yes]
3 Log in with administrator privileges.
4 Click [Security Settings].
2
Configure the Security Settings.
From the [Security Settings] menu, select the setting you want to configure.
For details on settings related to certificates, refer to the following:
Command Center RX User Guide
To Next Page
Loading...
