5-25
Operation on the Machine > Sending Documents to E-mail Address of Logged in User (to myself)
Sending Documents to E-mail Address of Logged
in User (to myself)
When user login is enabled, the document is sent to the E-mail address of the logged in user.
1
Configure the settings.
Before using this function, the following are necessary.
2
In the basic screen for sending, select [] [] key > [Me(E-mail)] > [OK] key
• An E-mail address must be set in user login for the user who logs in.
Adding a User (Local User List) (page 9-7)
When this function is used, functions other than transmission cannot be used.
To Next Page
Loading...
